Whether you’re a new pool owner or a professional cleaner, these tips will leave your pool sparkling clear.
You might need to purchase a couple of equipment to get the job done. But worry not. The tools are cheap and easy to find online.
Table of Contents
#1: Check the Water’s PH Level
Pure water has a PH level of 7. It’s neither acidic nor basic. Pool water is seldom ever pure, so don’t worry too much if your pool has a PH level of slightly above 7. Strive for a PH level of between 7.2 and 7.8.
You can balance the PH level by adding chlorine. But it shouldn’t be your only solution. For starters, do the following.
#2: Clean Your Pool Occasionally
Get rid of bugs and leaves floating in your pool. Wash scum from the walls and floors. Use a pool vacuum cleaner for thorough cleaning regularly. You will save money on chlorine and enjoy your sparkling clear pool.
If you can’t get your pool clean no matter what you do, consider hiring professionals. They use a blend of tools and solutions to remove scum, dirt, and debris from your pool.
#3: Use a Pool Clarifier
Bacteria, algae, and mold in your swimming pool can make the water look cloudy. There are a few solutions. One of them is to apply a pool clarifier. The best pool water clarifier can keep your pool looking neat and clear for a while.
Pool clarifiers are excellent for in-between maintenance. You can also use them after cleaning your pool to improve the water’s clarity.
#4: Buy a Pool Cover
The majority of dirt, leaves, bugs, and debris in your pool all come from the surrounding areas. They’re blown into your pool by the wind. A pool cover can protect your pool from these unwanted materials.
A cover also keeps sunlight out of your pool. This helps reduce evaporation. It also maintains the water’s temperature. With no debris falling into your pool, you’ll have less maintenance work to do.
#5: Run the Pool Pump
Experts recommend that you run the pool pump for a minimum of eight hours every day. This is the amount of time required to complete one turnover. If energy bills aren’t a problem, consider running the pump throughout.
Running your pool’s filter helps get rid of mold, bacteria, debris, and scum—the main causes of stagnant water. Needless to say, stagnant water is dangerous for your health.
#6: Clean or Replace your Filter
The filter in your pump works hard to keep your pool clean every day. But it shouldn’t run forever. Clean it after a few weeks. If you’re not sure how to do this, call a professional for assistance.
Keep in mind pool filters come in different types. Some of them use a cartridge. However, many pool filters use sand to filter out debris. Another common type of filter—D.E.—uses a special powder to clean your pool.
#7: Check for Cracks
Cracks and crevices in your pool can introduce dirt and bacteria to the water. They can also make it difficult to keep your pool clear. Look out for cracks on the walls and floor regularly. Also, repair any parts of your pool that show signs of wearing out.
#8: Keep the Water Levels in Check
There’s a genuine reason for keeping the water levels in your pool in check. It can damage your pump, which is an expensive repair. This happens if the water level reduces too much. The filtration system sucks air into the pump, which burns its motor.
If the water level is too high, the pool’s filter might not clean all the bacteria in the water. In turn, this can increase maintenance costs.
#9: Service the Pool Heater
The pool heater is a maintenance component. Service it after one year of consistent use of your pool. Also, clean the scum from water tubes to add clarity to your pool’s water.
#10: Use the Right Products
The final tip is to use the right products for cleaning your pool. Learn the best measurements for chlorine. Too much of it causes eye and skin irritation. Discover the best pool clarifiers and the tools to use to remove scum from your walls and floors.
